Chongqing Dongchong Aluminum Co., Ltd.
Create Value for Society, Help Customers and Help Employees Achieve Their Dreams
Add to Cart
Antirust Mirror Surface 1mm 3003 H112 Diamond Aluminum Sheet 6~2500mm Width
Production Description
Al-mn alloy 3003 is the most widely used type of anti-rust aluminum. The strength of this alloy is not much higher than that of commercial pure aluminum and can not be strengthened by heat treatment, therefore, cold-working method is adopted to improve its mechanical properties: High Plasticity in annealing state, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability and poor machinability. It is mainly used for low load parts, such as oil tank, gasoline or lubricating oil conduit, various liquid containers and other small load parts made by deep drawing, which require high plasticity and good weldability, the wire is used for rivets.
The use of 3003 for processing requires parts with good formability, high corrosion resistance and weldability, or requires both these properties and work with higher strength than 1XXX alloy, such as kitchenware, food and chemical products processing and storage devices, tanks for transporting liquid products, and various pressure vessels processed with sheet metal. With the pipeline.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Aluminum Checker Sheet Advantages
1. Accurate size, good anti-slip effect,wide range of applications .
2. Strong plasticity, easy forming and excellent processing performance.
3. Embossed aluminum sheet can form a dense and strong oxide film on aluminum surface to prevent the intrusion of oxygen, so it has good corrosion resistance.
4. Good elongation and tensile strength, fully able to meet the normal processing requirements (stamping, stretching), high formability.
5. The surface quality of aluminum checker plate is good, no oil spots, waves, scratches, roller marks, neat trimming, no burrs.
6.The advantages of tread plate are slip resistant, corrosion resistant, hygienic, protective and attractive.
7.Tread plate can be found in parking lots, garages, stairways, step ladders, elevators, loading docks, warehouses, distribution centers, hospitals, factories, ships, floating docks, refrigerator trucks, walk-in freezers, elevators, walkways, handicapped access ramps, truck tool boxes, trailers, and much more.
| Diamond Aluminium Plate | |||||||||
| Alloy | 1050/1060/1100/3003/5754/5083/6061/6063/6060/6082/8011 | ||||||||
| Temper | H14,H18,H24,H32 ,H112, H114, T4,T6 ,T651,O | ||||||||
| Thickness (mm) | 0.4mm to 7 mm | ||||||||
| Width (mm) | Up to 1800mm | ||||||||
| Length (mm) | Up to 6000mm | ||||||||
| Standard | GB/T3880-2012 | ||||||||
| MOQ | 5ton | ||||||||
| Application | 1)Decorated inside and outside the car /building frame, windows, doors, ceiling, decorating panel and curtain wall | ||||||||
| 2)Household appliances: refrigerators, microwave ovens, audio equipment, etc. | |||||||||
Technical Property
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min | |||||
| 3003 | O H111 | >0. 20—0. 50 | 95-135 | 35 | 15 |
| >0. 50 — 1. 50 | 17 | ||||
| >1. 50 — 3. 00 | 20 | ||||
| >3.00 — 6. 00 | 23 | ||||
| >6.0-12.5 | 24 | ||||
| >12.5-50 | |||||
| H12 | >0. 20—0. 50 | 120-160 | 90 | 3 | |
| >0. 50 — 1. 50 | 4 | ||||
| >1.50 — 3.00 | 5 | ||||
| >3. 00 — 6. 00 | 6 | ||||
| H14 | >0. 20 — 0. 50 | 145-195 | 125 | 2 | |
| >0. 5- 50 | 2 | ||||
| >1. 50 — 3. 00 | 3 | ||||
| >3. 00—6.0 | 4 | ||||
| H16 | >0. 20 — 0. 50 | 170-210 | 140 | 2 | |
| >0.50 — 1.50 | 3 | ||||
| >1. 50—4. 00 | 3 | ||||
| H18 | >0. 20 — 0. 50 | 190 | 170 | 1 | |
| >0. 50—1. 50 | 2 | ||||
| >1. 50 — 3. 00 | 2 | ||||
| H22 | >0. 20—0. 50 | 120-160 | 80 | 6 | |
| >0. 50 — 1.50 | 7 | ||||
| >1.50 — 3.00 | 8 | ||||
| >3. 0—6.0 | 9 | ||||
| H24 | >0. 20—0. 50 | 145-195 | 115 | 4 | |
| >0. 50 — 1.50 | 4 | ||||
| >1.50 —3. 00 | 5 | ||||
| H26 | >0. 20 — 0. 50 | 170-210 | 140 | 2 | |
| >0.50—1.50 | 3 | ||||
| >1.50 — 3. 00 | 3 | ||||
| H28 | >0,20 — 0,50 | 190 | 160 | 2 | |
| >0. 50〜L 50 | 2 | ||||
| >1. 50—3. 00 | 3 | ||||
Photos
Company Introduction
Established for nearly 20 years, CHONGQING DONGCHONG ALUMINUM CO.,LTD. who mainly engages in aluminum industry product research, design, sales and has two subsidiaries yet, with professional equipment, mature technology, excellent team, whose annual sales have ranked first in the southwest region of China.
We have long-term cooperation with many outstanding euterprises, whose product quality is convincing.Our company provides custom-made services, in the product accuracy far more than peers.
| Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd | |||||||
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) | ||||
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm | |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) | ||
| Φ 500 | Φ500(normal) | ||||||
| Φ 600 | |||||||
| 650mm Slitting machine |
Product Tags:
Inquiry Cart
0
| ||||||