Chongqing Dongchong Aluminum Co., Ltd.
Create Value for Society, Help Customers and Help Employees Achieve Their Dreams
Add to Cart
Architectural Flooring 3mm 6061 T4 Aluminium Checkered Sheet 6~2500mm Width
Production Description
6061 aluminium alloy is a high quality aluminum alloy produced by heat treatment and pre drawing process. Its strength is not comparable to that of 2XXX or 7XXX, but its magnesium and silicon alloy has many characteristics, it has excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, material density and no defects and easy polishing, easy coloring film, excellent oxidation effect and so on.
The 6000 series aluminium alloy represents 6061 mainly contains magnesium and silicon. Therefore, 6061 is a cold-treated aluminium forging product with the advantages of 4000 series and 5000 series. It is suitable for applications requiring high corrosion resistance and oxidation resistance. It has good usability, easy coating and good workability.
| ALLOY | CHEMICAL COMPOSITION (%) | |||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | |||
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | __ | 0.1 | __ | __ | 0.05 | 0.15 | rest | |
| 5A06 | ≤0.40 | 0.000～0.400 | ≤0.10 | 0.50～0.8 | 5.8～6.8 | __ | 0.0001～0.005 | ≤0.20 | 0.02～0.10 | __ | 0.05 | 0.1 | rest | |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | |
| 5050 | 0.4 | 0.7 | 0.2 | 0.1 | 1.1-1.8 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | |
| 5154 | 0.25 | 0.4 | 0.1 | 0.1 | 3.1-3.9 | 0.15-0.35 | 0.25 | 0.2 | 0.05 | 0.15 | rest | |||
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | __ | 0.2 | 0.15 | __ | 0.05 | 0.15 | rest | |
| 5454 | 0.25 | 0.4 | 0.1 | 0.5-1.0 | 2.4-3.0 | 0.05-0.2 | 0.25 | 0.2 | 0.05 | 0.15 | rest | |||
| 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | rest | |||
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | _ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest | |
| 5086 | 0.4 | 0.5 | 0.1 | 0.2-0.7 | 3.5-4.5 | 0.05-0.25 | 0.25 | 0.15 | 0.05 | 0.15 | rest | |||
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.05 | 0.15 | 0.1 | 0.05 | 0.15 | rest | |||
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | __ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest | |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | __ | 0.1 | 0.1 | __ | 0.05 | 0.15 | rest | |
Aluminum Checker Sheet Advantages
1. Accurate size, good anti-slip effect,wide range of applications .
2. Strong plasticity, easy forming and excellent processing performance.
3. Embossed aluminum sheet can form a dense and strong oxide film on aluminum surface to prevent the intrusion of oxygen, so it has good corrosion resistance.
4. Good elongation and tensile strength, fully able to meet the normal processing requirements (stamping, stretching), high formability.
5. The surface quality of aluminum checker plate is good, no oil spots, waves, scratches, roller marks, neat trimming, no burrs.
6.The advantages of tread plate are slip resistant, corrosion resistant, hygienic, protective and attractive.
7.Tread plate can be found in parking lots, garages, stairways, step ladders, elevators, loading docks, warehouses, distribution centers, hospitals, factories, ships, floating docks, refrigerator trucks, walk-in freezers, elevators, walkways, handicapped access ramps, truck tool boxes, trailers, and much more.
| Diamond Aluminium Plate | |||||||||
| Alloy | 1050/1060/1100/3003/5754/5083/6061/6063/6060/6082/8011 | ||||||||
| Temper | H14,H18,H24,H32 ,H112, H114, T4,T6 ,T651,O | ||||||||
| Thickness (mm) | 0.4mm to 7 mm | ||||||||
| Width (mm) | Up to 1800mm | ||||||||
| Length (mm) | Up to 6000mm | ||||||||
| Standard | GB/T3880-2012 | ||||||||
| MOQ | 5ton | ||||||||
| Application | 1)Decorated inside and outside the car /building frame, windows, doors, ceiling, decorating panel and curtain wall | ||||||||
| 2)Household appliances: refrigerators, microwave ovens, audio equipment, etc. | |||||||||
Technical Property
Tensile Strength :205 MPA
Tensile Yield Strength: 55.2 MPA
Elastic coefficient :68.9 GPA
Bending ultimate: Strength 228 mpending
Yield Strength :103 MPA
Photos
Company Introduction
| Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd | |||||||
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) | ||||
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm | |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) | ||
| Φ 500 | Φ500(normal) | ||||||
| Φ 600 | |||||||
| 650mm Slitting machine | Uncoil(MM) | Finished size(MM) | |||||
| ID | OD | Width | Thickness | ID | OD | Width | |
| Φ 400 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150 Φ500 | ≤ 1700(normal) | 6-600 | |
| Φ 500 | |||||||
| Aluminum foil Slitting machine | Uncoil(mm) | Finished size(MM) | |||||
| ID | OD | Width | Thickness | ID | OD | Width | |
| Φ 76 | ≤ 550 | ≤ 1200 | 0.08-0.12 | Φ76Φ76 | ≤ 550(normal) | ||
| 1450mm Crosscutting machine | Uncoil(MM) | Finished size(MM) | |||||
| ID | OD | Width | Thickness | ID | OD | Width | |
| Φ 505 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150 Φ500 | ≤ 1700(normal) | 6-600 | |
| Φ 605 | |||||||
| 2750mm Crosscutting Machine | Uncoil(MM) | Stacking height (mm) | Thickness (mm) | Width (mm) | Length (mm) | ||
| ID | OD | ≤ 440 | 1.5-12 | 900-2500 | 1500-12000 | ||
| Φ 505 | ≤ 1800 | ||||||
| Small crosscutting machine | ID(MM) | OD(MM) | Weight(MM) | Width(mm) | Thickness(mm) | ||
| 370≤Φ≤ 508 | ≤ 1300 | ≤ 2T | ≤ 400 | ≤ 2.0(Al)<
Inquiry Cart
0
| |||